The quality problems of complete set distribution cabinet installation are often ignored by many workers. Due to the improper treatment of these problems, it has brought a lot of trouble to the actual work.
我們來分析一下常產生的一些質量問題，主要有以下幾點：
First, let's analyze some common quality problems, mainly including the following:
基礎型鋼焊接處焊渣清理不凈，除銹不干凈，油漆刷不均勻，有漏刷現象。
The welding slag at the welding position of foundation section steel is not cleaned, the rust removal is not clean, the paint brush is uneven, and there is a phenomenon of missing brush.
柜（盤）內，電器元件、瓷件油漆損壞。
In the cabinet (panel), the paint of electrical components and porcelain parts is damaged.
柜（盤）內控制線壓接不緊，接線錯誤。
The control line in the cabinet (panel) is not crimped tightly and the wiring is wrong.
手車式柜二次小線回路輔助開關切換失靈，機械性能差。
The auxiliary switch of secondary small line circuit of handcart cabinet fails to switch, and the mechanical performance is poor.
根據以上存在的問題我們應該采取相應的措施：
According to the above problems, we should take corresponding measures:
提高質量意識，加強作業者責任心，做好工序搭接和自、互檢檢查。
Improve quality awareness, strengthen the sense of responsibility of operators, and do a good job in process overlapping, self inspection and mutual inspection.
加強責任心，保護措施具體。
Strengthen the sense of responsibility and take specific protective measures.
公司地址：濟南市槐蔭區經十西路3788號
備案號：魯ICP備09028695號-3
魯公網安備37010402441282號
TEL:0531-69922480
EMAIL:
首頁
產品
電話
置頂